Archive for boom pump

• Standard

A term to describe the negative pressure on the pump’s suction side. The measurement can be taken from the water surface on the suction side all the way up to the center line of the pump’s hydraulics. To Learn more […]

• Standard

It’s a concrete mix that combines lime as a binding element with a fine aggregate like sand and gravel as a coarse aggregate. The proportions vary depending on the style of structure, but the usual proportions are 1:2:3.  To Learn […]

• Standard

To Learn more check Boom Pumps Information! This method is used to strengthen excavations and is particularly useful for constructions that extend underground or high above ground, such as high-rise buildings. Shotcrete is frequently used with lagging and other ground […]

• Standard

In comparison to PCC or even lean mixes, which have a lower cement to liquid ratio, a rich mixture includes the most cement in respect to liquid components. Because there are no aggregate particles or mortar in a severe mixture, […]

• Standard

A type of concrete mixture that includes larger stones to more efficiently cover greater areas. Because finely graded concrete is more expensive, using plum concrete lowers the cost of the materials without affecting the construction. Visit: Boom Pumps Page!

• Standard

PCC concrete has a greater cement concentration than lean concrete, which includes more water and is hence more liquid in consistency. The cement to water ratio in plain cement concrete (PCC) is greater. Visit: Boom Pumps Page!

• Standard

The purpose of a hydraulic pump is to convert mechanical energy into fluid power. All of these pumps have positive displacement, with the outlet and intake flows walled off from one another. To improve cooling, small amounts of fluid are […]

• Standard

A pump that boosts water pressure and pushes water through plumbing pipes at a quicker rate. Read Boom Pumps Info!

• Standard

The NPSH stands for Net Positive Suction Head, which is a means of calculating the net loss of pressure that happens when the pump is first installed, which is the difference between the intake pressure and the lowest pressure. Read […]

• Standard

The term relates to a boom pump that is positioned on a building’s top level in order to articulate and put concrete from that vantage point. Read Boom Pumps Info!